Report

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles — Project made with xTool S1 machine for Christmas.

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles — Project made with xTool S1 machine for Christmas.

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles — Project made with xTool S1 machine for Christmas.

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles — Project made with xTool S1 machine for Christmas.

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles — Project made with xTool S1 machine for Christmas.

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles — Project made with xTool S1 machine for Christmas.

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles — Project made with xTool S1 machine for Christmas.

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles

[Laser cut and engrave] Snowman wooden bottle holders with various liquor bottles

DIY Christmas wooden Christmas

Instruction

XmasBall-05v2.0..xcs

XmasBall-05v2.0.

.xcs

Application scenario

Laser processing (120min)

Machine & module

xTool S1

40W

Compatible xTool Machine

F1 Ultra

20W

M1

5W, 10W

D1

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

P2

55W

F1

10W

S1

10W, 20W

M1 Ultra

10W, 20W

P2S

55W

Accessories

xTool S1 Honeycomb Panel

xTool S1 Riser Base

Material used

1/8"(3mm) Basswood Plywood

1/8"(3mm) Ash Plywood

gift

107

2054

Information

      "Create unique and personalized Christmas decorations with our laser cut files! 

⛄✨ Transform your mini bottles into adorable snowmen with these festive designs.

 Customize them with different colors and accessories for a truly original look. 

Perfect for decorating your tree or giving as gifts!"

Don't forget to like all our projects. Thanks

Instruction

1

Step1: Open XCS xTool Creative Space and upload XCS files

Open templates on your computer

start XCS

2. Go to Files -→ open project

3. select Xmas Ball - 05 v 2.0..xcs in your drive

2

Step2: place your material into the Laser

Place your piece in the center of the cutting board.

3

Step3: Set up the focus

Click on the distance button to measure the focus.

4

Step4: Select engrave area

Click on Mark processing area area button

Select the type of cutting surface. If you're using parquet planks, this will certainly be the rectangle. click on “Start making”

Move the pointer to the first point, then press the laser button. Do the same with the second point.

At the end, don't forget to click on the “End making” button. If you don't, you'll have to start again (I often do).

Your zone is shown at the top of the window (yellow frame).
To close the operation, simply click on “Done”.

The cutting area appears on your canvas. Now copy your favorite coasters into it.

5

Step5: check all settings

blue layer

6

Step6: start engraving

Click on the process button at the bottom of the application.

The application shows you a preview of the job and calculates how long it will take to complete.
Click on “Start” to send the commands to the laser.

All cut

or only one

7

Step7: Remove pieces from machine

It's done, remove piece

8

Step8: fix mini-bottles with gift ribbon

fix mini-bottles with gift ribbon

9

Step9: decorate your xmas tree

Hide your gift (money, message, credit card, …) in your bauble and attach it to your Christmas tree.

Comments

Remixes

License

You may also like

christmas souvenir

christmas wood cut

wood christmas candlestick

wood christmas gift