Report

[Laser cut and engrave] Decorative Arabesque – Wooden Box Details — Project made with xTool M1 Ultra machine for Laser cut and engrave.

[Laser cut and engrave] Decorative Arabesque – Wooden Box Details — Project made with xTool M1 Ultra machine for Laser cut and engrave.

[Laser cut and engrave] Decorative Arabesque – Wooden Box Details — Project made with xTool M1 Ultra machine for Laser cut and engrave.

[Laser cut and engrave] Decorative Arabesque – Wooden Box Details

[Laser cut and engrave] Decorative Arabesque – Wooden Box Details

[Laser cut and engrave] Decorative Arabesque – Wooden Box Details

[Laser cut and engrave] Decorative Arabesque – Wooden Box Details

[Laser cut and engrave] Decorative Arabesque – Wooden Box Details

Decorative Arabesque – Wooden Box Details

Instruction

Caixa arabesco.xcs

Caixa arabesco

.xcs

Application scenario

Laser processing

Machine & module

xTool M1 Ultra

10W

Compatible xTool Machine

M2

10W, 20W

F2 Ultra UV

5W

F2

15W

P3

80W

F2 Ultra

40W

F1 Ultra

20W

M1

5W, 10W

D1

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

P2

55W

F1

10W

Laserbox

40W

S1

10W, 20W, 40W

M1 Ultra

20W

P2S

55W

Accessories

xTool M1 Riser Base with Honeycomb Panel

Material used

1/8"(3mm) Walnut Plywood

gift

13

884

Information

      This instruction defines the standard process for laser cutting decorative arabesque designs in walnut plywood using the xTool M1 Ultra (10W diode laser). 
The process includes proper file preparation, dimensional adjustment based on the wooden box used as the base product, secure material fixation using a honeycomb bed and magnets, and validated cutting parameters (90% power, 5% speed).
Note:
The provided design file contains three (3) instances of the arabesque pattern for layout convenience. These duplicated designs may be deleted, duplicated, or repositioned as needed, according to the preference, material size, or production requirements.

decorative arabesque

Wooden Ornament

laser cut design

Instruction

1

Step1: Machine Setup

Power on the <xTool M1 Ultra and install the honeycomb bed

Place the walnut plywood on the honeycomb and secure the material using magnets

Ensure that the material is flat / no movement during cutting

Open xTool Creative Space and import the arabesque file, resize the sesign to match the base product.

Perform Auto Focus

Run frame to confirm the area.

2

Step2: Cutting Parameters

Power: 90%

Speed: 5%

Passes: 1

Air Assist: ON

If cut is not complete:

Perform an additional pass without repositioning the material
Or apply a validated parameter adjustment

3

Step3: Cutting Operation

Confirm cutting parameters in XCS

Start the laser cutting process

Continuously monitor the operation

Upon completion, wait 30-60 seconds

Carefully remove the cut parts and scrap

4

Step4: Quality Inspection

Acceptance criteria

Fully cut-through design
Arabesque intact, no broken features
Clean edges with no excessive charring
Dimensions match adjusted design
Proper fit to the base box

5

Step5: Finishing (If Applicable)

Light sanding of edges (grit 220-320)
Remove soot or residue
Apply sealer, varnish, or finish as specified
For overlay designs, glue after finishing

Comments

Remixes

License

You may also like

intricate detail