Corazón memorial mascota

To make the design I inserted a heart shape 200 mm wide. I selected the heart and hit cut. 

I inserted the photo I wanted to record and edited it, so that I deleted everything around it and left only the image of the dog. I left it at "original figure"  and full on the grayscale. As it is an image, the record function is selected by default. 

Place the image in the center of the heart. I selected align vertically.

Finally, I wrote the text, adapted the size and placed it in the free place around the image. I inserted a drawing of a bone to put the dog's name inside. I selected everything and hit record. 

Once we have the established parameters, we are going to turn on the Xtool and place the material with which we are going to work. In my case it was 3mm thick MDF. 

We let the Xtool work. First it will record the image and the text, which is what it will take the longest, finally it will cut the heart. 

Once it was finished, I also took out the support to place the heart. 

To finish I gave a matte varnish spray to the piece. Once dry, I placed it on the stand. 

Ready, we have our heart finished.