xTool Hat

Install the pink cutting mat,paste the PU Heat Transfer Vinyl and install the point blade.Import the file into the XCS software, connect the device and cut Glow in the Dark PU Heat Transfer Vinyl.

You can get a unique hat after cutting the pattern and heat stamped on the hat.

Notes

1.Glow in the Dark PU Heat Transfer Vinyl is cut from the back and then transferred print to the front, so remember choose the 【reflect】 when you cutting graphics such as text.

2.Pay attention to the cutting range, the cutting area can not exceed the scope of Glow in the Dark PU Heat Transfer Vinyl. Otherwise, it is easy to damage the bottom of the cutting mat.

3. While cutting two different colors of Glow in the Dark PU Heat Transfer Vinyl, you can put two smaller different colors Glow in the Dark PU Heat Transfer Vinyl in the machine at the same time.Then put the pattern on the Glow in the Dark PU Heat Transfer Vinyl for cutting.