Official Xtool Maker Shop Sign

Information

      A fun project for your shop. Uses all Xtool Selected Material.

There are (5) canvases in this file. You will cut the "White" "Black" and "Green" Canvas the others are for your instructions and view of the sign. 

Have fun and take your time. I was able to use all Xtool settings for materials.

I applied 3M double stick tape to the green and black acrylic before cutting. You 'may' need to lower speed to get through the material and 3M. Do a small cut test.

If you use mirror for green, invert image before cutting and cut on the back of the acrylic.