Report
Paint Stand
ID 14181
Files
Original files
AuthorM1 · 1/8"(3mm) Basswood Plywood
1
1
Preview
Preview
Preview
Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 50 Credits
Tips for a great Make Profile →126
3283
Information
I made these out of scrap wood. Often, I've made a project on the M1 and need to lift the material as I paint edging. These are customizable sizing. There's 1/2 inch spacing of notches to let you set the size to what you need.
These are sized to be made out of 3mm stock. The file has the top-notched and bottom-notched sizes. and the working parts over to the side if you need to adjust notch sizing for you stock material.
Instruction
1
Step1: Load file into the machine
Arrange the cut files over your leftover scraps and cut as many as needed.
2
Step2: Use stands
The stands can be arranged in any configuration needed to support your project material. stand pieces can be chained in as many as needed.
Hope this is a useful tool for you.
Comments
Remixes
License
You may also like

Keychain display
6
79
business card jig
0
1

Laser cut take on Lincoln Logs interlocking boards.
3
6

Bamboo pen engraving template
2
27

Leonardo's dome. Leonardo's Dome
2
5
Miniature Collapsible Sawhorses
24
89
Material Alignment Jig for P2S
13
28

Small, I mean tiny, Laser cut wooden shelf
33
186

Plate / frame stand
27
250

Sqaure
0
9
P2S P2 P3 Slat pins
1
3

support PC
12
58
Tetris “T” block
16
43

Letter X
4
20
Small wooden cube box with interlocking finger joints
2
11
Modular Castle game
75
193

Wooden Desk Drawer Divider Set Laser Cut SVG - Interlocking Cross-Slot Dividers with Finger-Pull Notches, 3mm DXF
0
1

10 sided storage tub
18
109

