odim29

Report

[Laser cut and engrave] Laser Cut Decorative Heart Wall Art with Intricate Floral Pattern — Project made with xTool P2 machine for Laser cut and engrave.

Two Layer Fancy Heart

2026 Valentine's Day Contest

Instruction

Fancy Heart 4

.xcs

Application scenario

Laser processing (120min)

Machine & module

xTool P2

55W

Compatibles · 12

Material used

1/8"(3mm) Basswood Plywood

104

Information

      Layered Fancy Heart for Valentines Day. 

I made this piece for my wife for Valentines Day.

I found it a little generic and changed this file to add names and anniversary date. which is the purple version.

Instruction

Step1

Unfortunately, for this piece, i didn't take any step process pics.

The Standard p2 basswood settings are applied for this project but i always use 100 power, 5 speed and usually I don't get any annoying uncut spots. Use whatever settings that work for you.

Also make sure you measure the depth based on your setup before cutting.

Option 1

1. Cut out the two pieces

2. Paint the Whole Heart shape

3. Paint the Cutout Heart shaped piece

4. Glue the heart shaped pieces together

These steps will work fine and make a nice piece

… or you can do what I've started doing lately and use all the pieces

Option 2

1. Cut out the two pieces

2. Gather all the cutout pieces you can (it's hard to get them all so don't worry too much about the smaller pieces)

3. Glue the heart shaped pieces together