Report

🍂 DIY Fall Magnets – Bring Autumn to Your Fridge!

Instruction
FallMagnets.xcs
FallMagnets
.xcs
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
20W
Compatible xTool Machine
M2
10W, 20W
F2 Ultra UV
5W
F2
15W
P3
80W
F2 Ultra
40W
F1 Ultra
20W
M1
5W, 10W
D1
5W, 10W, 20W
D1 Pro
5W, 10W, 20W, 40W
P2
55W
F1
10W
S1
10W, 20W, 40W
M1 Ultra
10W
P2S
55W
Material used
1/8"(3mm) Basswood Plywood
gift
138
2121

Information

      Celebrate the cozy fall season with these wooden magnets. With engraved pumpkins, autumn leaves, and rustic harvest motifs, they are the perfect mix of practical and decorative. This project uses a laser cutter to engrave and cut two layers of wood that are glued together with a hidden magnet inside.
    

Instruction

1

Step1: Engrave & Cut the Front

  • Place your material (e.g. plywood) into the laser.
  • Engrave the design details for the front side.
  • Cut out the outer shape.
2

Step2: Prepare the Back

  • Engrave and cut the matching backside piece.
  • Make sure to also include the outline frame for easy alignment later.
3

Step3: Assemble the Two Halves

  • Place the engraved backside in the outline frame to keep it centered.
  • Apply a thin layer of wood glue to the inside surface.
  • Position the engraved front piece on top, pressing gently.
4

Step4: Add the Magnet

  • From the back, insert a small round magnet into the cutout space.
  • Secure it with glue.
  • Allow everything to dry completely.
5

Step5: Enjoy Your Fall Decoration

Now your fridge, memo board, or office space can wear the colors of autumn too! 🍁

Comments

Remixes