Llavero scrabble

To design these keychains, you just have to follow the following steps:

• We will insert 20 x 20 mm squares
• In each of them we will put each letter and the number that corresponds to it according to the game of Scrabble.
• We place the letters and numbers inside each square in the place that corresponds to it. I have used the "Lato" typeface. 
• We select the square to mark and the letters and numbers to engrave. 
• We group each square so that when we place it on the keychain nothing moves. 
• We insert 20 x 20 mm squares and we are going to place them together to join them according to the number of letters we want to put on. We started with three.
• Place the three squares together and lined up. When we have it, we click on combine and join. 
• We will add a 4 mm circle and place it in the first square in order to have the hole through which we will put the ring of the keychain. Select both shapes and click on combine and subtract in superimposition. In this way it will be attached to the previous shape. Select cut. We make a copy. 
• We take the previous copy and add another square to the right. We select everything and click on combine and join. We already have the 4. We make a copy. (We will repeat this same process until we have the 8 keychain). If we need more, then we add more squares. 
• Finally, all that remains is to place the letters that make up the name on the base we need. 

Turn on the Xtool and place the material with which we are going to work. In this case 3 mm thick MDF. 

We check all the parameters and hit start. 

We let the machine do its job. 

Once we have our finished pieces, all we have to do is put the rings of the keychains and attach them to it. 

Look how cool they are!