brightmakesthings

Report

[Laser cut and engrave] Laser Cut Green Leaf Shaped Decorative Wall Mirror — Project made with P2S machine for Laser cut and engrave.

Lemon Lime Acrylic Mirror Wall Art Decor

Instruction

lemonmirror

.xcs

Application scenario

Laser processing

Machine & module

xTool P2S

55W

Compatible xTool Machine

F2 Ultra UV

F2 Ultra（Single）

F2 Ultra

F1 Ultra

F1 Lite

M1 Ultra

D1 Pro 2.0

D1 Pro

Laserbox

Material used

1/8"(3mm) Silver Mirror Acrylic

1059

Information

      These are just so fun! Making a fun mirror bathroom :)

Instruction

Step1

First I cut the mirror acrylic outline that the other acrylic piece will snap into. I keep kerf offset off for this part. Cut mirror side down.

Step2

Then I cut the other acrylic parts. I use kerf offset for this bit so they fit snuck in the silver frame. Cut mirror side down.

Note from learning the hard way: don't kerf offset so much that you have to force the pieces in- mirror acrylic is brittle and it will crack.

Step3

I use the 1mm black acrylic as a backing. I put 3M adhesive tape on before cutting. Cut 3M side down.

Step4

Put the pieces together. Take the adhesive off the black acrylic and stick it to the back on the mirror lined up.

Step5

Hang with command strips or double sided tape!

Comments

Remixes

License

CC BY-NC

Lemon Lime Acrylic Mirror Wall Art Decor

Information