HomeLaser&Cut ProjectsToy/Game/ModelModel
James
James
Report
[Laser cut and engrave] BAE Hawk jet airplane
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] BAE Hawk jet airplane
[Laser cut and engrave] BAE Hawk jet airplane
[Laser cut and engrave] BAE Hawk jet airplane
[Laser cut and engrave] BAE Hawk jet airplane

BAE Hawk jet airplane

Instruction
3mmBAEhawk.xcs
3mmBAEhawk
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
20W
Material used
3mm plywood
2mm plywood
3mm cardboard
.050 matboard
gift
164
1524

Information

      This is a very simple model of the BAE Hawk advanced jet trainer as used by many air forces, as well as by the RAF Red Arrows aerobatics team.  I have included files to let you use a range of material thicknesses including 2 and 3mm plywood or cardboard as well as .050 inch matboard.

Make a whole team of nine for yourself!
Aviation
model
lasercut model
model
airplane

Instruction

1

Step1: Cut kit card

BAE Hawk jet airplane instruction: step 1 - Cut kit card
Preview

Leave the parts attached to the kit card until you are readyy to assemble.  This model is one made from the .050 inch matboard.

2

Step2: separate the parts from the frame

BAE Hawk jet airplane instruction: step 2 - separate the parts from the frame
Preview

Use a sharp craft knife to remove the parts from the frame.  Make sure that you remove all the tabs cleanly while the parts can be laid flat on your cutting mat.

3

Step3: glue on the wing

BAE Hawk jet airplane instruction: step 3 - glue on the wing
Preview

Use a small amount of  white glue to stick the pieces together.

4

Step4: glue on the tail

BAE Hawk jet airplane instruction: step 4 - glue on the tail
Preview

Glue the tail in place using a small dab of white glue.  Set aside to dry.

Comments

Remixes

License

CC0