举报
![[Laser cut and engrave] Cross-shaped decoration with 'I can do all things through Christ' text](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/dc8e6a83-b844-4b8f-833e-3f66d68ca94f?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Cross-shaped decoration with 'I can do all things through Christ' text](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Cross-shaped decoration with 'I can do all things through Christ' text](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/dc8e6a83-b844-4b8f-833e-3f66d68ca94f?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Cross-shaped decoration with 'I can do all things through Christ' text](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/21b6d642-bc91-4654-8297-568eb466bc0e.JPG?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Cross-shaped decoration with 'I can do all things through Christ' text](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/27a6d29f-f263-4517-a5f6-8fecd4a87996.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
腓立比书4：13 十字架
教程
Philippians4-13Cross
.xcs
显示剩余(1项)
应用场景
激光加工
机器与模块
xTool P2
55W
xTool D1
10W兼容的 · 8
使用的材料
3mm中密度纤维板
430
2323
教程
1
步骤1: 把碎片剪掉
预览
如果你用的材料和我一样，先切白色的，再剪黑色的。
2
步骤2: 组装十字架
预览
把前面的白色十字粘在其中一个黑色十字上，然后把另一个黑色十字架粘在上面，黑色一面朝外。
把白色的小底座粘到较大的黑色底座上，确保槽口对齐。然后把支架固定在十字架上。
或者
我把前后十字架放进两个支架里，没有用胶水，然后把中间的十字楔在中间，用橡胶锤轻轻敲一下，把它们固定在底座上。然后我在中间的十字架顶部两侧涂上强力胶，施加压力，它们就接合了。
评论
