Rudolph Mirror

Instruction

rudolphmirror

.xcs

Show 1 more

Application scenario

Laser processing (300min)

Machine & module

xTool M1 Ultra

20W

Compatible xTool Machine

F2 Ultra UV

F2 Ultra（Single）

F2 Ultra

F1 Ultra

F1 Lite

P2S

D1 Pro 2.0

D1 Pro

Laserbox

Material used

Acrylic mirror

Piant

2068

Information

      [Style] Line art
[Prompt] funny reindeer smiling

Preview

With the Aimake program a cute rudolph is asked for
This image is then brought into xcs software and is adjusted to size and edited
This project is engraving on acrylic mirror so it is no different than regular mirror that it gets engraved on the back side in reverse
This image didn't need reversing but if lettering or words are added then they will need reversing.
Once the image is ready to be engraved it is sent to machine to be processed.

Preview

When the image is engraved on the back side of the mirror it is clear
The area's that need red paint (the nose) gets red paint first, then once that paint is dry the second color is added.
Repeat these steps based on the amount of different colors that are needed. Remember to only expose the area you want that color to be.
Another tip is to not engrave mirror directly on the honeycomb, place a piece of wood between it and the mirror to engrave.

Comments