Halloween Haunted House – Wooden LED Candle Holder

⚙️ Production Info

Application Scenarios: Halloween home décor, party decorations, handmade gift, safe kids' lantern (LED only).

Software: xTool Creative Space (XCS).

Machine: xTool S1 – 20W.

Material Use: Birch plywood.

Material Info: 3 mm thickness, sanded, optionally varnished.

Total Time: ~20–25 min (engraving & cutting), ~5 min assembly.

🔥 Laser Settings (xTool S1 – 20W)

Cutting: 100% power, 6–8 mm/s, Air Assist ON

Engraving (windows, details): 35–40% power, 120 mm/s, 318 LPI

📖 Step-by-Step Instructions

Prepare the files

Open the .xcs file in xTool Creative Space.

Check all paths are set correctly for cut (red) and engrave (blue).

Place the material

Fix a 3 mm birch plywood sheet on the honeycomb panel.

Turn ON Air Assist.

Engrave & cut

First engrave the haunted house details (windows, doors, trees).

Then cut the outline of the panel and base.

Assemble the holder

Slot the base and haunted house panel together.

No glue is required, but optional for extra strength.

Finishing touches

Sand edges for smoothness.

Optionally paint in black or orange for Halloween vibe.

Place an LED candle inside (do not use open flame).

Display

Test in a dark room – the haunted house casts an eerie shadow on the wall.

🎯 Uses

Halloween home decoration

Safe lantern alternative (LED only)

Handmade seasonal gift

Collectible interchangeable panel for modular candle holder