cmfcreations718

K5 Crystal Keychain

k9 heart crystal 3d mesh point cloud using lasertools.ai and there prefer settings and it comes out great
settings power 55 dots 200 layer height 0.04 khz 60

MachineF2 Ultra UV(Ultraviolet light · 5W)

Processing ModeInner Engraving

Processing type3D Inner Engraving

Thickness11.5mm

Brand/Supplierk9 hearts

Settings

Version: 2.0.0

Precautions

Wear goggles that match the wavelength of the light source

When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;

Prevent high-temperature burns after processing

Freshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.

🔔 Processing Tips

Clean the surface before marking

spray rubbing alcohol 70% i use and use a mirco fiber clothes and make sure you wear a rubber glove on the hand you are holding it in so after you clean it you dont put finger markers on it

Did these settings work?No results yet

No one has shared a result yet. Be the first to let other makers know if these settings worked.

K5 Crystal Keychain

Similar Materials