Easter Bunny Box

1.  Cut out the bottom bunny (3mm basswood)
2. Cut out 4x bottom inlay (3mm Basswood)
3. Cut out 1x bottom inlay with holes for the magnet (3mm basswood)
4. Cut out 1x transparant acrylic (kerf off set is 0.15) 
5. Cut out 1x top pink mdfb
6. Cut out top inlay  (3mm basswood)
7. Cut out top inlay with holes for the magnet. (3mm basswood)
8. Cut out the bunny feet and ears and bow (kerf off set 0.15 for the feet and ears) (3mm pink acrylic)

1. Glue the first bottom inlay on the bottom bunny. Then glue the other 3 bottom inlay also.
2. Then on top of the bottom inlay glue the bottom inlay with magnet holes.
3. Take 4 ittle magnets 6mmx 3mm high and put it in the holes off the bottom bunny.
4. Remove the backing of the acrylic bunny.
5. Click the little pink glitter feet and ears into the transparant bunny (it will snuck fit because of the kerfsetting. 
6. Glue the big top inlay with holes on to the back of the Pink mdf bunny.
7. Put the magnets into the holes of the top inlay.
8. Glue the  smaller top inlay on tho the back of the top inlay.
9. Click the blank acrylic bunny into the Pink mdf top (the acrylic bunny must be a snuck fit because of the kerfsetting .

Use wood glue to glue all the wood parts, and super glue for the magnets.