Report
![[Laser cut and engrave] Lasergraviertes Holzmaßstab-Messwerkzeug für Werkstatt](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/7a5c9d85-9226-4e1b-928b-7c4ebdf64559.jpeg?x-oss-process=image/resize,m_fill,w_1280,h_960,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Lasergraviertes Holzmaßstab-Messwerkzeug für Werkstatt](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Lasergraviertes Holzmaßstab-Messwerkzeug für Werkstatt](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/7a5c9d85-9226-4e1b-928b-7c4ebdf64559.jpeg?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Lasergraviertes Holzmaßstab-Messwerkzeug für Werkstatt](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/5bb956df-211a-4ee1-9e60-59ce4dbf7fcc.jpeg?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Lasergraviertes Holzmaßstab-Messwerkzeug für Werkstatt](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/df87a04d-8df1-459d-97f3-bd3a0377a439.jpeg?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
A set of spacers for different material thicknesses of 3, 4 and 5 mm with storage
Remix
Instruction
Material Spacer Remix
.xcs
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
20WCompatible xTool Machine
P3
F2
F2 Ultra UV
F2 Ultra（Single）
F2 Ultra
F1 Ultra
F1
F1 Lite
S1
P2S
P2
M1
D1 Pro 2.0
D1 Pro
D1
Laserbox
M2
Material used
1/8"(3mm) Basswood Plywood
4mm poplar plywood
5mm poplar plywood
11
505
Information
An extension of the idea of TNDS - thank you for that!
In order to not only leave some space from below and at the same time to be able to hold on to it, this individually configurable set of spacers is possible. The small parts do not get lost in the associated storage.
The set is made entirely from leftover parts and is therefore absolutely cost-effective. You need some plywood in the thicknesses 3mm for the spacers, in 4mm for the storage and for the spacers and 5mm on the one hand for the side parts of the storage and for the thickest spacers. The three wooden arets are marked in color in the file.
The storage is joined together with a few drops of glue.
This remix is based on
Material Spacer Used With xTool Honeycomb Material Pins
TNDSInstruction
1
Step1: Cut 3 and 4 mm (purple and yellow)
Cutting and labeling the 3mm (yellow) and 4mm (purple) parts
2
Step2: Cutting 5mm (red)
Cutting and labeling the 5mm parts (red)
3
Step3: Gluing together
Glue the base plate to the cover plate over the two side panels. Pay attention to the orientation of the side panels.
Comments
Remixes
You may also like
Inlay Stencil for A3 Plates
0
1
Laser jig for aluminum bottle openerkeychain with 3 mm wood
23
104
Squadring Jig
19
60
Laser Cut 4" Rock/Slate Coaster Jig with Settings
10
71
Positionierhilfe für Ringgravur
34
41
Strike dimension 2mm to 100mm
0
4
Card and Dog Tag
3
2
Flat hold-down pins for honeycomb work tables (Remix)
36
213
Pendant JIG
0
15
Name tags 52 X 34 mm with hole 3 mm
0
1
Laser Cut Grid 6 envelopes 145x126 mm
0
2
Use IKEA Variera shelf insert as tool for XTool's F2
5
10
JIG 4-Capacity Slate Coaster Holder Template – Laser Cut Files for 4-Inch Round & Square Coasters – Precision Alignment Jig
11
134
Laser Cut 4 Inch Round Coaster Alignment Jig in 3mm Basswood Plywood
26
234
F1 Ultra and F2 UV Wooden Placement Jigs/Jigs 5 mm
51
236
Block Engraving Stencil 160x22 mm
0
0
Laser jig for aluminum bottle openerkeychain with 2 mm wood
9
44
Push stick for table saw
2
14