Neurospice Designs
Neurospice Designs

Deep Brown PU Leather

Engraved on deep brown PU leather (0.992mm) using the M1 Ultra (20W) at 231mm/s and 20% power, single pass on baseplate. PU leather patches are forgiving; they darken cleanly and hold fine linework without melting or warping at these settings. The text came out crisp, and the character detail stayed readable at a small patch size. Good starting point for anyone doing hat patches, bag tags, or bookish accessories.
MachineM1 Ultra(Blue light · 20W)
Processing ModeProcess on baseplate
Processing typeEngrave
Thickness0.99mm
Material colorBrown
Settings
Pass1
Speed231mm/s
Power20%
Spacing100°
Bitmap modeJarvis
Engraving modeBi-directional
Parameter ConverterLimited-time Free
Convert to My Machine Parameters
0
Precautions
Wear goggles that match the wavelength of the light sourceWear goggles that match the wavelength of the light source
When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Processing chlorine-containing materials is prohibitedProcessing chlorine-containing materials is prohibited
It is strictly forbidden to process chlorine-containing materials such as PVC, artificial leather, or veneer soft rubber. Laser burning releases highly corrosive toxic gases such as hydrogen chloride, endangering human health and corroding guide rails, lenses, and circuit boards. When unsure about the material, first conduct a small-area test and observe the smell.
Pay attention to odor prevention during processingPay attention to odor prevention during processing
Materials such as leather, rubber, and silicone produce noticeable odors; ensure good ventilation and wear protective masks if necessary.
Prevent high-temperature burns after processingPrevent high-temperature burns after processing
Freshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.