Project made with xTool M1 machine for Laser cut and engrave.
Project made with xTool M1 machine for Laser cut and engrave.
Porte-à-lettres
post it holder
.xcs
Scénario d'application
Laser (30min)
Machine et module
xTool M1
10W
Compatibles · 13
Matériau utilisé
3mm Bassholz Sperrholz
201
1444
Information
Ce projet est très simple et peut être réalisé par ceux qui ne connaissent pas très bien les lasers. Il est réalisé en contreplaqué de 4 mm pour des post-its de 7,5 cm x 7,5 cm