Report

[Laser cut and engrave] Schlüsselbrett mit personalisierbaren Namen — Project made with xTool S1 machine for Laser cut and engrave.

Schlüsselbrett mit personalisierbaren Namen

Instruction

Schlüsselbrett

.xcs

Application scenario

Laser processing

Machine & module

xTool S1

20W

Material used

1/8"(3mm) Basswood Plywood

bite/Beize

black color

1273

Information

      A noble key rack made of dark brown coloured wood with fine, engraved ornaments and a customisable lettering. Four black hooks offer space for key rings. The decorative design with floral lines and butterfly element gives the piece an elegant, homely character and makes it a practical and stylish accessory for the entrance area.
The sign can simply be stuck to the wall or similar with double-sided adhesive tape.

The size is 25x12.5cm

Instruction

Step1: Personalize your name

Preview

After opening the file, they can customize and personalize the family name that appears on the bottom right of the sign.

Step2: Laser parts

Step3: Colouring parts

You can either paint the sign with a dark stain or a simple dark paint.

The circles that will later become the hooks can now be dyed black.

Step4: Gluing together

Preview

First, the circles are always glued together to form a stack of 3. After that, each stack is glued to the sign. To make it easier to position on the shield, a circle is lasered into the shield at the appropriate position.

Comments