Report

[Laser cut and engrave] Beautiful dragonfly and hummingbird artwork on square slate coasters — Project made with xTool S1 machine for Laser cut and engrave.

[Laser cut and engrave] Beautiful dragonfly and hummingbird artwork on square slate coasters — Project made with xTool S1 machine for Laser cut and engrave.

[Laser cut and engrave] Beautiful dragonfly and hummingbird artwork on square slate coasters — Project made with xTool S1 machine for Laser cut and engrave.

[Laser cut and engrave] Beautiful dragonfly and hummingbird artwork on square slate coasters — Project made with xTool S1 machine for Laser cut and engrave.

[Laser cut and engrave] Beautiful dragonfly and hummingbird artwork on square slate coasters — Project made with xTool S1 machine for Laser cut and engrave.

[Laser cut and engrave] Beautiful dragonfly and hummingbird artwork on square slate coasters

[Laser cut and engrave] Beautiful dragonfly and hummingbird artwork on square slate coasters

[Laser cut and engrave] Beautiful dragonfly and hummingbird artwork on square slate coasters

[Laser cut and engrave] Beautiful dragonfly and hummingbird artwork on square slate coasters

[Laser cut and engrave] Beautiful dragonfly and hummingbird artwork on square slate coasters

Beautiful dragonfly and hummingbird artwork on square slate coasters

Instruction

DFHB.xcs

DFHB

.xcs

Show 4 more

Application scenario

Laser processing

Machine & module

xTool S1

40W

Compatible xTool Machine

M2

3W, 10W, 20W

F2 Ultra UV

5W

F2

5W, 15W

P3

5W, 80W

F2 Ultra

40W, 60W

F1 Ultra

20W

M1

5W, 10W

D1

2W, 5W, 10W, 20W

D1 Pro

2W, 5W, 10W, 20W, 40W

P2

55W

F1

2W, 10W

S1

2W, 10W, 20W

M1 Ultra

10W, 20W

P2S

55W

F2 Ultra (Single)

60W

Material used

Rock Stone

gift

594

3626

Information

      Wanted to create a combination of the two in a single image with a flowery background.

Instruction

1

Step1

The original images were created using AI. Then used ImagR and selected the banning black slate as material. Then changed the dpi to 318. Did not use the one touch. The images in the XCS software have been inverted with no adjustments. The slate was treated with one coat of black satin Krylon paint. Let dry for 30 minutes before engraving. Canvas files in XCS are sized at 4"x4". You'll need to adjust based on the exact dimensions of your slate. Each piece takes roughly 13 minutes to engrave based on the settings used in the XCS file.

Comments

Remixes

License

This work contains AI-generated content.

You may also like