Air Vent

Instruction

4x10vent

.xcs

Application scenario

Laser processing (25min)

Machine & module

xTool S1

20W

Material used

3mm marble MDF

2 sided tape

1041

Information

      Well when you need a vent and you have an xTool no worries......just make one.

Preview

2 More images

This project starts with a rectangle 11" x5" in size
This rectangle has it's corners set to a small radius
Once the outside is ready the vents are added
This was done the same way by just adding thin rectangle and giving it radius corners.
Then this was copied and pasted to be side by side with equal spacing from each end and the middle
Once the first 2 vents were in place the grid array feature was used to create more venting holes
With the amount selected to fill the area they were spaced out to be equal.
After the entire vent was designed it was set to be cut and was sent to be processed.
Once finished the new vent was cleaned off with a cloth and 2 sided tape was added to adhere to the wall.

Comments