Report
![[Laser cut and engrave] Spider Lamp](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/237cd22e-5822-4909-8a86-d6d6e460bf16?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Spider Lamp](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Spider Lamp](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/237cd22e-5822-4909-8a86-d6d6e460bf16?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Spider Lamp](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/a75af1d4-55d6-4700-92c6-880950a07115/WhatsApp Image 2024-09-19 at 18.56.10.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Spider Lamp](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/301e5af2-9a85-4849-a8f9-f74f285fefd1/PSX_20240919_231139.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Spider Lamp
Instruction
Laterne-Spiderman
.xcs
Application scenario
Laser processing (90min)
Machine & module
xTool M1
10WAccessories
xTool M1 Air Assist Set
xTool M1 Riser Base with Honeycomb Panel
Material used
2mm lime plywood
347
4227
Instruction
1
Step1: Setting parameters
Preview
For the lantern motif I chose a picture from XTool Artimind.
Now I have set the parameters for all layers (cut and engraving).
2
Step2: Editing
Preview
Preview
Preview
Then I place all the parts on my lime plywood to save space, carry out a frame ride and then start processing.
3
Step3: Putting all the pieces together
Preview
Finally, I put all the pieces together and glue them with wood glue.
See instructions.
Comments
Remixes
License
This work contains AI-generated content.