1/8"(3mm) Red Clear Iridescent Acrylic

AC050-01

3mm

Inflamable

P2S

Laser Power

80W

Processing Mode

Lift platform processing

Processing Type

Cut

Ver detalles de parámetros en Studio/XCS

Hora de actualización de parámetros: 2026-07-17

Seleccionado

makeblock-xtool

Resultados profesionales · Configuración instantánea · 30 días sin riesgo

Agotado

Cantidad

Precauciones de procesamiento

Flammable material

This material is flammable under laser equipment. Close monitoring is required during processing to prevent fire.

Remove protective film before processing

This material usually comes with a protective film to prevent surface damage during transport. Remove the film before laser processing to avoid ignition and damage to the acrylic.

Clean the material after processing

During processing, this material may generate dust or other substances that remain on the surface. To improve appearance and functionality, clean off carbon residue, slag, or oxide layers using water, alcohol, ultrasonic cleaning, or specialized cleaners.

Use odor protection during processing

Processing materials may release strong odors or fumes. A proper ventilation and exhaust system is required to protect the operator's health and reduce the impact of smoke on processing quality.

Turn on air assist (gas pump)

Air assist provides a strong airflow to remove debris and smoke. Surface discoloration is caused by the buildup of heat and smoke. Using air assist helps cool the material, prevent burn marks and color changes, and improve cutting speed and performance.

Consultar las guías de procesamiento de materiales

Para madera, metal, acrílico, etc. y precauciones durante el proceso