Question 1

What does the Table Lamp Generator make?

Accepted Answer

A complete laser-cut table lamp, not a shade. You pick one of six forms and the generator works out every interlocking piece, nests them onto a sheet, and exports a cut file. Add a socket and a bulb and you have a finished lamp on the desk.

Question 2

Which lamp shapes can I choose?

Accepted Answer

Six: a Simple upright panel, an Arch, a Pinecone, a Lighthouse, a slotted Globe and a long-legged Spider. They are genuinely different constructions rather than restyled versions of one shape, so switching form rebuilds the entire cut layout — the Simple panel comes out as five panels and three feet, the Globe as more than a dozen interlocking ribs with connector rings.

Question 3

Do I need to buy special hardware?

Accepted Answer

You need an E26 socket and a bulb, and the generator is built around the ones Atomm sells. Where the form mounts the socket itself you choose the socket finish — black walnut twist, brushed silver or antique brass — and the bulb shape, tubular or pear, so the openings are cut to fit the part you actually receive rather than a generic hole.

Question 4

What is the Kerf Offset for?

Accepted Answer

A laser removes a little material as it cuts, so slots come out slightly wider than drawn and press-fit joints end up loose. Kerf Offset compensates for that in millimetres, and there is a link straight to the Kerf Test Generator if you do not know your machine and material's figure yet. Set it once and the joints hold without glue.

Question 5

Can I see the lamp lit before I cut it?

Accepted Answer

Yes. The 3D Preview shows the assembled lamp switched on, on a desk, with the light actually spilling across the surface and through the gaps in the structure. Because you can recolour it from thirteen surface swatches, you can see how the glow reads through dark green MDF versus pale basswood before you buy a sheet.

Question 6

What materials should I cut it from?

Accepted Answer

1/8 inch sheet stock: basswood or walnut plywood for a warm wood-grain lamp, or coloured MDF if you want the body to be white, yellow, pink, sky blue, mint or dark green. All the surface swatches in the tool correspond to real boards, and the sockets and Edison bulbs are listed alongside them so one order covers the whole lamp.

Question 7

What files do I get, and will they work with my laser?

Accepted Answer

A nested cut layout with every piece laid out on the sheet, dimensioned in millimetres or inches and marked as cut lines. Download it for any laser software, or use Open in Studio to send the job straight into xTool Studio.

Question 8

Can I design on my phone?

Accepted Answer

Yes. The layout reflows on a phone, with the lit 3D preview on top and the lamp forms in a grid beneath it, so you can pick a form and see it lit on the way home and cut it later.

Question 9

Can I sell the lamps I make?

Accepted Answer

Yes. A lamp is a high-value item for a market stall or an online shop, and because the colour is a setting rather than a redraw, one form covers a whole range: the same globe in walnut, white and dark green reads as three products.

Question 10

Is it free to use?

Accepted Answer

Designing is free. Choosing a form, recolouring it, setting the kerf and previewing the lamp lit in 3D all cost nothing, so you only commit once you have seen the lamp you are about to cut.

桌燈產生器

如何製作激光切割桌燈

選擇一個表單

匹配你的材料和你的机器

預覽它發光，然後剪切

選擇適合您項目的材料

六種形式，每個關節已經解決

它知道你正在购买哪个灯泡和插座

切缝是一个设置，而不是一个惊喜

在購買之前請先查看光澤

製作燈具的價值所在

你實際上坐的桌子

一場沒有人其他人帶來的喬遷派對

有形狀的夜燈

庫存，其中一個表單是三個產品

立即開始使用 Atomm Craft Lab

激光切割桌燈的常見問題解答

台燈生成器會製造什麼？

我可以选择哪些灯具形状？

我需要购买特殊硬件吗？

Kerf 偏移是用來做什麼的？

我可以在剪掉它之前看到灯亮吗？

我應該用什麼材料來裁剪它？

我會得到哪些文件，這些文件能與我的激光雕刻機配合使用嗎？

我可以在我的手机上设计吗？

我可以出售我制作的灯具吗？

使用是免費的嗎？

邀請朋友註冊，雙方都能獲得積分。