Interchangeable decorative plate

ID 246724
Instruction
Files
Original files
AuthorM2 · 1/8"(3mm) Basswood Plywood, 6 mm tiller plywood, vinyl, Spray paint, vernis, vernis marin, aimants, attache tableau
1
Preview
Preview
Preview
Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 50 Credits
Tips for a great Make Profile →
gift
309

Information

      I wanted to create a decorative plate that I could evolve with the seasons
It is divided into 3 distinct parts. 
Mine is not perfect because I had to modify the magnets several times to find some that would hold the plates in place. 
The final version is corrected for rectangular magnets of 2cm x 1cm and a thickness of 2mm.
    

Instruction

1

Step1

After several tries, putting all the elements on the same file and differentiating the cuts by color was the easiest for me.

The plate is 29 cm in diameter so that I can use 30x30cm plates.

I started by cutting only the round part in my 6mm plate and engraving the rectangles to place my magnets.

Then I placed my 3mm plate, I started printing the bottom part.

Once the printing was finished I cut out the lines, then the circle.

Then, you have to turn the cutouts over, (or at least the printed one) to be able to engrave the location to integrate the magnets.

 

The top and middle plates are spray-painted.

The "Happy Halloween" is cut in vinyl at the Silhouette and the bow is handmade but it is possible to buy a ready-made one.

Once the 3 plates were finished, I put 2 to 3 coats of spray varnish back and in the idea an outdoor use was planned, so I put a layer of marine varnish on the front and back of the decorated plates + the one on the base.

 

The pattern of the base plate is by Thiara Ney and available on the silhouette design store.

This is my first complete project and I partly used Silhouette Studio which I master better.

Comments

Remixes