BalefireGames
BalefireGames

Solid Walnut Wood

ID m-2708
Solid Walnut boards 1/2" thick. (real caliper 13mm). Kerf offset 0.13mm.
MachineP3(Carbon Dioxide Laser · 80W)
Processing ModeLift platform processing
Processing typeCut
Thickness13mm
Material colorBrown
Settings
Version: 2.0.0

How to apply settings in Studio/XCS

4
Precautions
Wear goggles that match the wavelength of the light sourceWear goggles that match the wavelength of the light source
When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Before cutting, make sure the fire extinguishing equipment is in placeBefore cutting, make sure the fire extinguishing equipment is in place
Before starting cutting, place the CO2 fire extinguisher or blanket within one meter of the equipment in a location that is easily accessible. Combustible materials such as wood and acrylic carry the risk of ignition.
Flammable materials should be placed near the smoke exhaust outletFlammable materials should be placed near the smoke exhaust outlet
Flammable materials such as wood, paper, and fabrics should be placed near the exhaust outlet, so that sparks and smoke generated during processing can be promptly removed, reducing the risk of ignition.
Handling when a flame alarm appearsHandling when a flame alarm appears
If a flame alarm is triggered when processing flammable materials such as plywood, acrylic, or polyester mesh: stop processing immediately, maintain smoke exhaust operation, and only open the lid after confirming there is no open flame. Do not open the lid directly to promote ignition.
Prevent high-temperature burns after processingPrevent high-temperature burns after processing
Freshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.

Similar Materials

Solid Walnut Wood
3mm

Solid Walnut Wood

MachinesP3 (CO2 80W)
ModeLift platform processing
TypeCut
BalefireGames
BalefireGames
6
brown walnut solid hardwood
19.05mm

brown walnut solid hardwood

MachinesS1 (Blue light 20W)
ModeProcess on baseplate
TypeEngrave
snow8ball
snow8ball
3
brown walnut solid hardwood
4mm

brown walnut solid hardwood

MachinesP2S (CO2 55W)
ModeHoneycomb panel
TypeEngrave
chefjohnston
chefjohnston
3
natural solid walnut wood
6.35mm

natural solid walnut wood

MachinesS1 (Blue light 40W)
ModeProcess on baseplate
TypeEngrave
anthonymckinney79
anthonymckinney79
0
Walnut Wood

Walnut Wood

Machines
F1 UltraF1 LiteF2F2 Ultra UVX1M2D1S1D1 ProD1 Pro 2.0F1M1P2M1 UltraP2S
Tested Settings178
badge-iconxTool-tested
solid ash

solid ash

MachinesS1 (Blue light 20W)
ModeProcess on baseplate
TypeEngrave
cele.lopez
cele.lopez
0
Walnut Wood
11mm

Walnut Wood

MachinesM1 (Blue light 10W)
ModeProcess on baseplate
TypeEngrave
choppterdoctor
choppterdoctor
0
Walnut Wood
4.76mm

Walnut Wood

MachinesM2 (Blue light 20W)
ModeLasering on flat surface
TypeCut
Nate
Nate
0
Walnut Wood

Walnut Wood

MachinesS1 (Blue light 40W)
ModeProcess on baseplate
TypeEngrave
Rottie Mom
Rottie Mom
1
Walnut Wood

Walnut Wood

MachinesS1 (Blue light 40W)
ModeProcess on baseplate
TypeEngrave
Rottie Mom
Rottie Mom
0
Walnut Wood

Walnut Wood

MachinesS1 (Blue light 40W)
ModeProcess on baseplate
TypeEngrave
Rottie Mom
Rottie Mom
1
Walnut Wood
11mm

Walnut Wood

MachinesF2 (Blue light 15W)
ModeUse slide extension
TypeEngrave
longoriajuan263
longoriajuan263
2
Walnut Wood
20mm

Walnut Wood

MachinesM2 (Blue light 20W)
ModeLasering on flat surface
TypeEngrave
ptf3d
ptf3d
0
Walnut Wood
25.9mm

Walnut Wood

MachinesM2 (Blue light 10W)
ModeLasering on flat surface
TypeEngrave
pamabdoo
pamabdoo
2
solid birch wood
15mm

solid birch wood

MachinesM1 Ultra (Blue light 10W)
ModeLasering on flat surface
TypeEngrave
s.francois50100
s.francois50100
0
solid beech wood
5mm

solid beech wood

MachinesM2 (Blue light 10W)
ModeLasering on flat surface
TypeEngrave
kylekatarn76
kylekatarn76
0
natural pine solid hardwood

natural pine solid hardwood

MachinesS1 (Blue light 40W)
ModeProcess on baseplate
TypeEngrave
ronk146
ronk146
0
natural bamboo solid hardwood
18.69mm

natural bamboo solid hardwood

MachinesM2 (Blue light 20W)
ModeLasering on flat surface
TypeEngrave
aurebillon
aurebillon
55
natural pine solid hardwood
15.09mm

natural pine solid hardwood

MachinesM2 (Blue light 10W)
ModeLasering on flat surface
TypeEngrave
Fletch
Fletch
0