Report

[Laser cut and engrave] Double Sided Desktop Name Plate: Standing Slot Sign — Project made with xTool D1 machine for Laser cut and engrave.

Double Sided Desktop Name Plate: Standing Slot Sign

Instruction

Double Sided Desktop Name Plate

.xcs

Application scenario

Laser (45min)

Machine & module

xTool D1

10W

Material used

1/8"(3mm) Basswood Plywood

3mm Walnut Plywood

Walnut Plywood

3mm Basswood Plywood

343

5969

Information

      This project was designed by me using Adobe Illustrator for iPad. 
It uses 1/8 walnut and 1/8th Basswood. 
The processes used are cut and engrave.
Before starting the project I spray painted the basswood board with gold spray paint and a clear coat and masked it. I cut and engraved it masking side up. 
The name plates on each side are adhered with super glue gel. 
The slot does not require glue, but can be backed with felt to protect your workspace.

Instruction

Step1: Add project to the workspace

Preview

Cut red, engrave black, a slot sized in inches is included if you have thicker material. Delete my notes on the workspace before starting.

Before starting the project I spray painted the basswood board with gold spray paint and a clear coat and masked it. I cut and engraved it masking side up.
The name plates on each side are adhered with super glue gel.
The slot does not require glue, but can be backed with felt to protect your workspace.

Step2: Cut red, engrave black.

Preview

2 More images

If you are using one material and staining or painting your pieces after you can cut and engrave everything at once. The base is 12inches long and the plate 10in HS so everything with fit in the bed of a standard D1 at one time.