Report
![[Laser cut and engrave] Kürbis-Chips](https://image-res.xtool.com/ali-res/community/making/b02d18b8-ea12-4580-8f9d-3fabb8394696/photo_2023-10-29_15-25-57.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Kürbis-Chips](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Kürbis-Chips](https://image-res.xtool.com/ali-res/community/making/b02d18b8-ea12-4580-8f9d-3fabb8394696/photo_2023-10-29_15-25-57.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Kürbis-Chips](https://image-res.xtool.com/ali-res/community/making/50f45a71-6887-42ae-83f6-a1b706c54a3d/photo_2023-10-29_15-25-57.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Kürbis-Chips
Instruction
Kürbis-Chips
.xcs
Application scenario
Laser (1min)
Machine & module
xTool M1
10WMaterial used
Poplar plywood
Wood
14
554
Information
The idea came on the eve of the Halloween holiday. As a gift for people who give sweets to children. Made on M1. Poplar plywood 2 and 4 mm. Chopped from leftovers.
Instruction
1
Step1: Place poplar plywood in the M1 cart. Place the layout in its own places.
Red layer.
Cutting speed at 2 mm thickness, 9 mm per second at 100% performance. Cutting speed at 4 mm thickness: 5 mm per second at 100% performance.
Blue layer.
The contour is applied at a speed of 120 mm per second at 100% power.
Comments
