Reportar
![[Laser cut and engrave] Fall Stacked Pumpkins](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3a1e33ab-0311-4b6c-9e27-a2b0921f8669?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Fall Stacked Pumpkins
Instrucción
FallStackedPumpkins
.xcs
Escenario de aplicación
Laser processing (120min)
Máquina y módulo
xTool S1
40WCompatibles · 9
Material utilizado
1/4"(6mm) MDF
159
1709
Instrucción
1
Paso1
Vista previa
Vista previa
Loaded project into XCS, cut out each part with the settings above used 6mm MDF board.
2
Paso2
Vista previa
Vista previa
Then painted bottom layer orange and top layer I used stain and glued them together. After that was completed I just used the scrap MDF board left and typed out the words I wanted to use and welded them and cut them out. Then painted them black and glues them to each pumpkin for the finished project
Comentarios
