신고
![[Laser cut and engrave] Paint Stand](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/5000aa00-823e-40e4-9361-a85823c04f23?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Paint Stand](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Paint Stand](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/5000aa00-823e-40e4-9361-a85823c04f23?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Paint Stand](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/4ea14ade-fc9d-43d5-a938-bc9af9f75280/IMG_9111.JPG?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Paint Stand](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/21df1628-7d0e-4601-8dcb-85ebb0aa25d2/IMG_9112.JPG?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Paint Stand](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/defa3ed8-41fd-4a14-bf11-f1098d78abec/IMG_9113.JPG?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Paint Stand
지침
Paint Stands
.xcs
응용 시나리오
레이저 (6min)
기계 및 모듈
xTool M1
10W호환되는 · 13
사용된 재료
1/8"(3mm) Basswood Plywood
79
1284
정보
I made these out of scrap wood. Often, I've made a project on the M1 and need to lift the material as I paint edging. These are customizable sizing. There's 1/2 inch spacing of notches to let you set the size to what you need.
These are sized to be made out of 3mm stock. The file has the top-notched and bottom-notched sizes. and the working parts over to the side if you need to adjust notch sizing for you stock material.
지침
1
단계1: Load file into the machine
Arrange the cut files over your leftover scraps and cut as many as needed.
2
단계2: Use stands
The stands can be arranged in any configuration needed to support your project material. stand pieces can be chained in as many as needed.
Hope this is a useful tool for you.
댓글
