報告
![[Laser cut and engrave] Giant mandala](https://storage-us.atomm.com/resource/xart/result/93694/387b1bb9-fcaf-4ca2-93a2-e22d96e0604a.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Giant mandala](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Giant mandala](https://storage-us.atomm.com/resource/xart/result/93694/387b1bb9-fcaf-4ca2-93a2-e22d96e0604a.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Giant mandala](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/e7bfc944-04bf-4154-8191-505d6a5d524f/0N6A6047a.JPG?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Giant mandala](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/c1633dad-cbf7-4f91-bf07-447c71f544ad/0N6A6041a.JPG?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Giant mandala](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/cdc775c3-7a7c-4b4d-8d2d-195ff70d89c0/0N6A6044a.JPG?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Giant mandala](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ab0a984d-5b9a-4642-b3dc-474e5f413b1d/0N6A6040a.JPG?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Giant mandala
指示
Slide1
.xcs
3件をさらに表示
アプリケーションシナリオ
レーザー (150min)
機械とモジュール
xTool S1
40W互換性のある · 13
使用される材料
1/8"(3mm) Maple Plywood
314
2069
指示
1
ステップ1: Cut slides
プレビュー
Cut slides 1, 2 and 3 twice and slide 4 once
2
ステップ2: Glue the slide 2
プレビュー
プレビュー
- Apply glue to a piece of slide 2 and affix to the 2 parts of slide 1, making sure that the cut line of slide 2 is perpendicular to the cut line of slide 1.
- repeat the operation with the second part of slide 2
3
ステップ3: Glue the slide 3
- Apply glue to a piece of slide 3 and affix to the 2 parts of slide 2, make sure that the cutting line of slide 3 is different than the cutting line of slide 1 and 2
- repeat the operation with the second part of slide 2
4
ステップ4: Glue the slide 4
Apply glue to slide 4 and apply to the center of slide 2
コメント
