mandala art generator

Select a template, adjust the size, pattern, and color of each layer to design a multi-layer mandala decoration, see the 3D effect in real-time, and export the file for direct use in laser cutting and UV printing with one click.

Product Highlights

No design basics required: starting from an existing template, just change a few numbers to get a work that can be directly ordered for processing.

• 41 sets of selected templates, ready to use
  • Covering styles such as stained glass, Oriental aesthetics, and world cultural patterns, including stained glass, peacock feathers, Dunhuang, Celtic, and Maya.
  • Each set consists of 4 to 18 layers, with a uniform overall size of 300mm, which can be previewed and exported upon selection.
• 105 kinds of edges, freely combinable
  • Divided into three categories: geometric, psychological, and natural, each with 35 types.
  • The number, length, and rotation angle of edges can be set per layer, and the same edge can produce completely different effects when stacked.
• 3D real-time preview, WYSIWYG
  • Each layer is rendered according to real thickness, material texture, and transparency, and can be rotated and zoomed to view the stacking effect.
  • When semi-transparent colors stack together, they mix to create new colors like colored glass.
• Layer-by-layer fine editing
  • Layer radius, layer thickness, center hole radius, edge pattern quantity, edge pattern length, and rotation angle can be adjusted using a slider or by direct input.
  • The layer structure list supports drag sorting, adding layers above or below, and deleting layers.
  • Modifying the 'overall size' in one place synchronously scales all layers proportionally.
• Automatic quality control before processing
  • Automatically check the narrowest part of each layer: if it is less than 1mm and the laser may not cut through, prompt immediately and provide adjustment suggestions.
• One-click export processing files
  • Export SVG by material with millimeter units and 1:1 actual size.
  • Each layer contains cutting lines and print fill colors simultaneously, with printing and cutting naturally aligned.
  • Small layers automatically nest into the center holes of larger layers, saving material.

Usage steps

There are four steps from opening to getting the processing file, and it can be exported directly without changing parameters.

1. Select a template, first see the effect
   • Click the thumbnail in the 'Template' column on the left, and the 3D effect of the template will be displayed in the middle immediately.
   • Drag the screen to rotate the view, use the wheel to zoom, and view the layering from the side.

2. Enter 'Edit', adjust layer by layer (if needed)

• Click on a layer in the 'Layer Structure' on the right, and the bottom panel shows the parameters of this layer.
  • Size: Layer radius, layer thickness, center hole radius.
  • Edge Pattern: Number of edge patterns, edge pattern length, rotation angle.
  • Material: Select material or customize color.
• Dragging the handle on the left side of the layer structure can adjust the stacking order; 'Add Upper Layer / Add Lower Layer / Delete Layer' can increase or decrease layers.
• Enter the finished width in 'Overall Size', and all layers will automatically scale proportionally.

1. Change edge pattern, change color
   • Click 'Switch Edge Pattern' to choose one from 105 edge patterns to replace the current layer.
   • The second row in the material area is for custom colors: click '＋' to choose color and opacity, and confirm to apply to the current layer.
   • If a certain layer is too thin and cannot be cut by the laser, a prompt will appear at the top of the panel, adjust the edge length or change the edge pattern as prompted.

1. Switch to 'Export', confirm and download
   • The export page displays the cutting pattern of each board divided by material, and marks the number of layers, nesting layers, and actual dimensions.
   • Click 'Export' in the bottom right corner to generate the processing files for laser cutting and UV printing.

Applicable materials

9 built-in panel appearances, and any color can be customized; each layer can choose its own material, and the same work can mix different materials.

• Thickness: Each layer adjustable from 0.4 to 20mm, default is 3mm, preview stacked according to actual thickness.
• Size: Layer radius 4 to 500mm; the overall width of the template is default 300mm, and can be scaled overall as needed.
• Color Compensation: The UV ink itself is slightly transparent, and when exporting, custom colors will automatically increase some opacity, making the print closer to the preview.

Export and Processing

The exported file is a ready-to-use SVG file: one board for one material, in millimeters, at a 1:1 actual size, no scaling needed.

• File Organization
  • One file for each material, with the filename as 'TemplateName-Material', for example, 'Dawn-BlackAcrylic.svg'.
  • Each layer of graphics is a layer in the file, with layer numbers consistent with the editor, making it easy to reference.
• Cutting and printing are separate, naturally aligned
  • print group: fill color by material or custom color, for UV printing, semi-transparent colors with opacity.
  • cut group: red fine line (#FE0002) as the laser cutting line.
  • Both groups use the same outline, printed first and then cut, will not be misaligned.
• Automatic nesting saves material sheets
  • In the same material, smaller layers will automatically fit into the center hole of larger layers, allowing multiple sheets to be placed side by side in one hole.
  • Leave at least 0.2mm between any two cutting lines to ensure each remains intact after cutting.
  • The export page will indicate the number of layers, nested layers, and the actual dimensions of each board, facilitating material preparation.