HomeTemplatesDecorHome DecorShelves & Holders
Thrasher114
Report
Laser cut and engrave
Project made with xTool D1 machine for Laser cut and engrave.
Project made with xTool D1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Console Baby Guard

Instruction
Console baby block.xcs
Console baby block
.xcs
Application scenario
Laser
Machine & module
xTool D1
5W
Compatibles · 10
Material used
3mm Basswood Plywood
3
293
Information
      Have a gaming console that seems to get turned off by the little ones?  This simple design will help with that problem.  Customize the design with your own images or message.
Instruction
1
Step1: L beam Design
Preview

This is a simple design but to ensure the joint is strong, I wanted to use a finger joint.  You could also cut out some small right triangles to reinforce it if needed.

2
Step2: Add designs
Preview

Next let's add in some designs to make the guard look nice.  I chose to make mine gaming themed.

3
Step3: Settings

All operations on this project are cut operations. The settings are for the D1 5W laser.  You may need to adjust the settings for your laser configuration.

Be sure to follow all the safety guidelines for your laser and always wear personal protective equipment when the laser is in operation. 

Comments
Remixes
xTool Supplies Used in This Template
xTool D1
xTool D1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC