Report
![[Laser cut and engrave] Homeowner (HoMEOWner)](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/dfde7eae-d9b1-4241-a08b-d318f126bb96?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Homeowner (HoMEOWner)
Instructionhome owner
.xcs
Application scenario
Laser
Machine & module
xTool S1
40WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
43
541
Information
A picture frame to show who the real homeowner is.
Instruction
1
Step1: create a rectangle
Preview
create a rectangle the size that you need
2
Step2: Add inner shape
Preview
Add the inner shape you want to display your photo. I chose an oval, but you can use any shape you want. Add the text you want to use and any designs you want.
3
Step3: Make a spacer for the picture
Preview
Preview
Preview
To make the spacer simply copy and paste the rectangle. Then outline with a negative offset. I used a (-6) offset, but you change that to suit you. Next create a rectangle and place over the top of your frame and hit subtract.
4
Step4: Make the bottom
Preview
Copy and paste the rectangle once again to make the bottom.
5
Step5: Engrave and cut
Glue it all together and add photo.
You can easily resize it all to suit your needs.
Comments
