![[Laser cut and engrave,Blade cut] Popcorn Shirt](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/a7bca97b-3af2-4953-be0f-7f3374942c3c?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Popcorn Shirt
Instruction
Information
For my wife's birthday party, we all had to dress up as something she likes
My wife likes popcorn :)
So my costume was homemade with a shirt that I made the design myself and cut out with the M1
For my costume I wore real popcorn in my hair - I'll spare you a picture of that :D
Instruction
Step1: creating the popcorn bag
select the shape from the basic shapes
select the function aspect ratio
then click on edit node
and remove the 3 nodes on the right
the two nodes still form a curve
we now flatten these
select both nodes and click on sharpe corner at the top
leave the two nodes selected and drag them to the length you want the bag to be
then click on done
Step2: Align strips
when looking at such bags, it is noticeable that the stripes are not straight and are slightly offset
choose rotate and -3 degrees
then copy the stripe and rotate it by +1 degree
and so on until you are back at 0
then the stripe should be straight again
mark the 3 left stripes (without the middle one)
copy these
and reflect them horizontally
Step3: cut the ends
the ends at the bottom should also be cut straight
to do this, insert a rectangle and mark it with a stripe, then select substract
repeat this with all the stripes
Step4: inner circle
create a circle
create an outline
move the outline to the left
mark both circles and rotate them
always create an additional copy of the circles
add the inner circle again
Step5: Text and Important step
insert the text and adjust it to the circles
IMPORTANT here is that you now mirror the entire project for printing on the vinyl foil
