Report
![[Laser cut and engrave] Graduation Gift Tag](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/e6a3cf10-d1bc-4cfa-9c07-3375475c6759?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Graduation Gift Tag
InstructionGradGiftTag
.xcs
Application scenario
Laser (30min)
Machine & module
xTool M1
10WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
30
464
Information
Needing a gift tag for graduation gift. This is quick and simple. It can be sized down or up depending on the gift. It can also used as a prop by adding a easel on the back.
Instruction
1
Step1: The Design Stage
Preview
Preview
Preview
3 More images
- Start by inserting two shapes
- a rectangle
- hexagon
- Overlap them at the top of the see the second photo for reference
- Unite them together on the right side panel
- Now we need to clean it up so click on edit nodes on the right side panel
- Click on the one that is sticking out the most and hit delete on your keyboard
- Add a small circle and place at the top. This is where our ribbon or string will go through.
- You can use .25" x .25"
- Make sure you align the circle horizontal center
- Select both objects and group them together
- Now add the text you would like in the font you want to use
- Dont forget to align horizontally center
2
Step2: Laser Set-Up
Preview
- Make sure all items are set to cut before sending to the laser
3
Step3: Assembly & Notes
Preview
You may notice my photos of the design are different from the finished product. After I cut this I noticed some of the cursive writing was too brittle so I went back and redid it to a better font that would cut better.
You can paint and glue down your pieces to the backer board.
For the photos I added a small tassel but you can also add some string and ribbon to pair with the tassel if tying to a gift.
Comments
