HomeTemplatesDecorHome DecorDoor Sign
Drew's Den
Report
[Laser cut and engrave] Dishwasher Clean and Dirty
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Dishwasher Clean and Dirty
[Laser cut and engrave] Dishwasher Clean and Dirty
[Laser cut and engrave] Dishwasher Clean and Dirty
[Laser cut and engrave] Dishwasher Clean and Dirty

Dishwasher Clean and Dirty

Instruction
Dishwasher.xcs
Dishwasher
.xcs
Application scenario
Laser (20min)
Machine & module
xTool S1
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
31
376

Information

      This is a quick and easy way to determine whether your dishwasher is dirty or clean. All you need is some magnets and glue.

14/312

Instruction

1

Step1: Laser

The first step is to use the laser to create the design. Be sure to wear laser-safe glasses.

2

Step2: Glue

Dishwasher Clean and Dirty instruction: step 2 - Glue
Preview

It's time to glue the letters and the bar to the sign. Make sure that one word is flipped upside down, so that when you flip it over, the correct side is facing up.

3

Step3: Add Magnets

Now its time to add magnets to the back so that it sticks to the dishwasher

4

Step4: Done

Dishwasher Clean and Dirty instruction: step 4 - Done
Preview

To indicate if your dishes are clean or dirty, simply turn the sign accordingly.

Comments

Remixes

xTool Supplies Used in This Template

xTool S1
xTool S1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

License

CC BY-NC-SA