![[Laser cut and engrave] Monthly planner](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/8265d64e-648e-4453-ba95-3e67fe215755?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Monthly planner
Instruction
Information
This design can be easily adapted to add magnets to each corner for placement on the fridge or cut two holes to hang from the wall
Instruction
Step1: Placement
Edit the board so that the family name is added to the top of the board.
Ensure that your board is placed over the material in your laser. Check that each coloured layer is set to the correct setting for your choice of material.
Press go.
If you are adding magnets there is no need to have the two cut out holes on the top of the board. If you would prefer to hang the board, make sure the holes are set to cut.
Layers
Green engrave
Orange score
Black cut
Blue cut but optional
Step2: finishing off
If you are adding magnets now is the time to glue them onto the board. Make sure you glue them to the back of the board. To make it look pleasing to the eye I added some magnets to the front as well.
If you are hanging on the wall add string to the top via the two cut out holes and hang.
