stephcreated
Report

Apple Thank You Teacher Stand

Instruction
AppleThankYou.xcs
AppleThankYou
.xcs
Application scenario
Laser (25min)
Machine & module
xTool M1
10W
Compatibles · 9
Material used
3mm Basswood Plywood
505
3711
Information
      Need a custom thoughtful gift to give your childs teacher? This is perfect for that special teacher that really helped your child succeed during the school year. 
Can be personalized with names and the year. 
    
Instruction
1
Step1: The Design Stage
Preview
Preview
Preview
8 More images

Each photo will have instructions as well.

  • Start off by creating an apple shape.
    • Left side panel, 
      • shapes icon, 
        • plant, 
          • scroll down for the apple.
    • You can size the apple to your liking. This project is sized at 4.625" x 4.894"
  • Create an outline of the apple
    • Right side panel
      • outline
        • offset distance - 0.079
          • ok
  • Adding the Puzzle Piece
    • Find a puzzle piece image
      • Paste it into XCS
        • Right side panel
          • Trace Image
    • Delete the picture you pasted. Keep only the outline.
      • Move the puzzle piece into the apple shape and size to your liking.
  • Adding text for engraving
    • Left side panel
      • “T” icon
      • Add the text you would like and make sure it's set to engrave.
        • Teachers name in side the puzzle, from, and message.
          • You can also add the year given to teacher in the leaf.
  • Creating the base
    • Create two rectangle
      • The first will be able 4.193" x 1.023"
      • The second will be 3.42" x .011"
      • Move the smaller box inside the bigger box
        • Alignment icon
          • Horizontal align center
            • vertical align center
    • Copy both rectangle
      • Select both
        • right click
          • copy
            • paste
      • Resize ONLY the outside rectangle to 5.674" x 1.023
    •  
2
Step2: Laser Prep / Send to Laser
Preview
Preview
  • Make sure the outline of the apple is set to cut.
  • Make sure the puzzle piece is set to cut
  • Make sure all text is set to engrave
  • make sure all the bases pieces are set to cut
  • Automeasure
  • Send to laser!
3
Step3: Assembly
Preview
Preview
  • Glue the puzzle piece in the blank space on the apple
  • Glue to the two passes together aligning them with the holes in the middle
    • The smaller piece should be glued on top of the longer one
Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood