Giraffe print earrings

Instruction

Giraffe earrings

.xcs

Application scenario

Laser (5min)

Machine & module

xTool P2

55W

Material used

3mm White acrylic

Cherrywood Plywood

Transparent Acrylic

134

2122

Information

      I needed a set of giraffe print earrings to match an outfit. I couldn't find any where so I made them!
I chose to wear the wooden ones, but for fun I also made a pair of coloured acrylic ones as well.

Instruction

Step1: Placement

This project is easy. All you need to do is place the pair of earrings in the correct place on your material and hit go. Ensure the settings for the materials you use are correct.

**Note If you are using acrylic cover the acrylic with tape etc so that you are able to paint over the top to enhance the pattern

You could also copy and paste one of the earrings to make into a matching pendant.

Step2: Wooden earrings

Preview

Once cut attach the earring fastenings onto the earrings and you are finished.

Step3: Acrylic earrings

Preview

For the acrylic earrings, apply paint to the front of the earring and over the top of the masked area. Leave to try (I used acrylic paint and then dryed with a hair dryer). Once dry carefully peel off the tape and attach the earring fastenings.

Enjoy!

Comments

Remixes

xTool Supplies Used in This Template

xTool P2