HomeTemplatesDecorHome DecorShelves & Holders
kelicraig
Report
[Laser cut and engrave] boxes and trays
Project made with xTool M1 machine for Laser cut and engrave.
[Laser cut and engrave] boxes and trays
[Laser cut and engrave] boxes and trays

boxes and trays

5x7 closed box master.xcs
5x7 closed box master
.xcs
Application scenario
Laser (60min)
Machine & module
xTool M1
10W
Material used
1/8"(3mm) Basswood Plywood
3mm Walnut Plywood
3mm Basswood Plywood
77
535

Information

      two boxes and two serving trays to experiment with inlays
Comments

Remixes

xTool Supplies Used in This Template

xTool M1
xTool M1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Walnut Plywood
3mm Walnut Plywood
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC