Report
![[Laser cut and engrave] Just Breathe Gold Acrylic Keyring Keychain](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/817caa56-babb-4f70-8b20-f0758c570226?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Just Breathe Gold Acrylic Keyring Keychain
Instructionjust breath keyring
.xcs
Application scenario
Laser (3min)
Machine & module
xTool F1
Material used
Transparent Acrylic
313
2134
Information
With this project you will learn how to engrave & cut gold acrylic with your xTool F1 or any other xTool family laser. You do not need a P2! Unless you are a lucky owner of one ;)
Instruction
1
Step1: What You Will Need
For this specific project you will need gold acrylic and a key chain attachment.
2
Step2: Instructions
In order to engrave Gold acrylic you will need Power: 60%-90% Speed:200 and to cut it Power:100 Speed:3 Passes: 2 In order to avoid melting make sure you raise your acrylic on the laser bed and this is very useful if you are cutting as you will see the acrylic dropping down as soon as it is cut which helps.
3
Step3: Enjoy!
Preview
Now that your acrylic is cut and engraved just add a chain and that's it, you are ready to show it off!
Comments
