All Photos have detailed instructions.

• First add two shapes. 
  • One the left side panel click the two shapes icon.
    • Add a square with the rounded edges
    • Add a half circle
    • Turn the half circle so the arching side is facing up.
• Drag the half circle over the square so that it overlaps a little
  • once you have it where you like it, on the right side panel, click “unite"
  • You should now have ONE shape
• Next, size your shape to your liking. For this project I used 5"x"7.
  • Dont forget to click the aspect locking ratio if need be.
• Now, add text.
  • You can get creative here. You can do a child's name/grandma, mama, mommy, mom, etc,
  • Move it into the bottom of the shape and center it. 
    • Right side panel click the align icon and click horizontal align center
• Right click the text you just created and make a copy and paste it somewhere outside of the shape.
  • Now make sure the original text you created is set to “score” and its centered at the bottome of the shape.
  • The text you copy and pasted make sure that is set to “Cut”
  • Make sure your original shape we made is set to “cut” as well
• Now we going to add more text from the left side panel
  • Type “Happy Mother's Day” and set it to “engrave”
  • make sure you move it to the top of the origianl shape
• There will be an arching icon on the right hand side of the “mothers day text” click and drag that so that the text is arching with the top of the design.
• Add one last text and says the year and set to “engrave”

• Recheck all you objects are set to the appropriate settings 
• Automeasure
• Send to the laser!

• Paint your letters and glue to within the scored lines at the bottom of your cut out.
• Add magnets to the back.