![[Laser cut and engrave] Felt Carnations](https://image-res.xtool.com/ali-res%2Fxcs%2Fcases7c1ae379-b1d4-429f-abfc-b42802041d74.jpeg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Felt Carnations
Instruction
Instruction
Step1
Thinking about a gift for Mum? Try felt carnations!
Note
Be careful when using superglue to avoid smudging the images.
Import designing documents Import designing documents and verify the size, processing position and mode. Attention:The documents of pictures are designed by 3mm basswood plywood and felts. If the types and thickness of materials you choose are different from that, please adjust the laser processing parameters according to the actual material.
Step2
Laser processing Put the basswood plywood and felts in the laser device one by one. Then，cut the basswood plywood and the felts by laser and blade respectively.
Step3
Stick the felt flowersFold the cut red felt in half, glue the edges together, and put it aside for a while.
Step4
Stick the small sticksGlue the small sticks to the edges of the red felt, then roll the felt, and finally glue it together and let it sit for a while.
Step5
Stick the leavesWrap the root of the flower with serrated leaves and glue them together. Put it aside for a while, and when the glue dries up, stick the green leaves on the serrated leaves.
Step6
FinishThe felt carnation is created!