Report
![[Laser cut and engrave] Shape Conforming Spiral Bowl](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/92c7154b-12d9-471d-a78a-a9e8a85cfe4f?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Shape Conforming Spiral Bowl
Remix
InstructionShape Conforming Spiral Bowl
.xcs
Application scenario
Laser (90min)
Machine & module
xTool M1
10WCompatibles · 8
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
747
4625
Information
REMIX Project. Add an engraved image on top of the spiral cut to make a beautiful dimensional bowl.
This remix is based on
Spiral bowl of cardboard
JohanInstruction
1
Step1: Engrave Flower Image
Preview
Secure the wood to the honeycomb and engrave the flower image onto the wood.
2
Step2: Cut the Spiral
Preview
Cut the spiral pattern.
3
Step3: Cut the Base
Preview
Cut the 2 pieces for the base.
4
Step4: Assemble
Preview
Preview
Fit the base together by crossing one piece on top of the other, they will snap together. Secure the edge of the spiral cut piece to the 4 points of the base.
Enjoy your new bowl.
Comments
