HomeTemplatesMiniaturesDollhouse
tpleo54
Report
[Laser cut and engrave] Rocking chair
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Rocking chair
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Rocking chair
[Laser cut and engrave] Rocking chair
[Laser cut and engrave] Rocking chair
[Laser cut and engrave] Rocking chair
[Laser cut and engrave] Rocking chair

Rocking chair

Instruction
rocking chair.xcs
rocking chair
.xcs
Application scenario
Laser
Machine & module
xTool S1
40W
Compatibles · 8
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
328
1879

Instruction

1

Step1: Download image and remove background.

Rocking chair instruction: step 1 - Download image and remove background.
Preview
Rocking chair instruction: step 1 - Download image and remove background.
Preview

Download the image you want then use the magic eraser to remove the background.

2

Step2: Make outline

Rocking chair instruction: step 2 - Make outline
Preview

make outline of your image. I used 1 mm. Then delete the original image.

3

Step3: make a copy

Rocking chair instruction: step 3 - make a copy
Preview

make a copy and start making your slots for the seat and back. Be sure to unlock the rectangle so you can set for the thickness of the wood you're using.

4

Step4: Build your design on your canvas.

Rocking chair instruction: step 4 - Build your design on your canvas.
Preview

Set everything the way you want it then set your score and cut settings.

5

Step5: Time to cut and score.

After everything is cut stain or paint if you desire. Then glue it all together.

Comments

Remixes

xTool Supplies Used in This Template

xTool S1
xTool S1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-SA