HomeTemplatesDecorHome DecorDoor Sign
Gena
Report
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave

Welcome Sign with Dog Theme

Instruction
Dog Print Welcome Sign with Dog Print March 2024.xcs
Dog Print Welcome Sign with Dog Print March 2024
.xcs
Application scenario
Laser (60min)
Machine & module
xTool P2
55W
Material used
Transparent Acrylic
Birch Plywood
3mm MDF Board
3mm Basswood Plywood
276
1353
Information
      Everyone likes dogs and I made this to sell as a front door hanger.
Instruction
1
Step1: Cut wood pieces for layer #2
Preview

I used one piece of 12 X 20 ¼" birch plywood to cut the wood pieces to fit on a 16" MDF round.

2
Step2: Cut "Welcome" out of Acrylic in reverse
Preview

I used acrylic for “welcome” because I like the way acrylic shines but wood could easily be used. I cut acrylic in reverse and keep the top layer of the protective paper attached so that no burn flashes show.   I used an Exacto blade to start the peel to get the paper off of the front of the acrylic.

Note: The orange circles in my image are pieces of junk jewelry to help me align my image since my material was black. I took them out before the cut.

 

3
Step3: Paint wood pieces, glue together, and clear coat
Preview

Painted wood pieces with acrylic paint, glued wood pieces to MDF base with Starbond Thick glue then added acrylic welcome.

Comments
Remixes
xTool Supplies Used in This Template
xTool P2
xTool P2
3mm MDF Board
3mm MDF Board
3mm Basswood Plywood
3mm Basswood Plywood

License

CC0