HomeTemplatesDecorHome DecorWall Art
L & T
Report
Laser cut and engrave
Project made with xTool F1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave

Engrave on Glass

Instruction
glass.xcs
glass
.xcs
Application scenario
Laser (2min)
Machine & module
xTool F1
10W
Compatibles · 5
Material used
Glass
glass
139
1596
Information
      after lots of tried and errors this was my best quality of engraving on glass
Instruction
1
Step1: paint the glass

for my first step i found some black acrylic paint and painted the side of the glass that i wanted to engrave on. i would recommend to use a thick layer and wait for it to dry. 

The engraving will not work if its not fully dry 

2
Step2: select an image or text

for this step i went to creative space and selected one of their images. you can bring any svg or any text file for this stage.

3
Step3: Engrave

at this point i have selected the engrave. the setting i used 70 power 30 speed and 120 lines was the best of all my tests. 

4
Step4: remove the paint

after the engraving is done use hot water and wipes or paper towels to remove all the paint. 

Thats it your done. 

Comments
Remixes
xTool Supplies Used in This Template
xTool F1
xTool F1

License

CC BY-ND