HomeTemplatesHome DecorOrnament
Kaerta
Report
[Laser cut and engrave] Mini bench with wooden blocks
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Mini bench with wooden blocks
[Laser cut and engrave] Mini bench with wooden blocks
[Laser cut and engrave] Mini bench with wooden blocks
[Laser cut and engrave] Mini bench with wooden blocks

Mini bench with wooden blocks

Klötzchenbank.xcs
Klötzchenbank
.xcs
Application scenario
Laser (6min)
Machine & module
xTool S1
Compatibles · 10
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
Oak Wooden Blocks
785
4934

Information

      The bench is built with wooden blocks measuring 160x22x8mm. The feet are lasered from wood or acrylic and are simply attached. The specified parameters refer to 3mm Basswood Plywood.
Comments

Remixes

xTool Supplies Used in This Template

xTool S1
xTool S1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC